ShareThis Page

How to make copper shine

| Saturday, Sept. 16, 2017, 2:30 p.m.
Copper pipe handrail
Copper pipe handrail

Question: I have about 60 feet of copper pipe railings that are very tarnished. Some are black now, but others aren't so bad. I have tried Brasso and all the other on-the-shelf cleaners. Some work OK but are time-intensive for an area like mine. My railings are the 2-inch-diameter copper pipes found in the plumbing section of Home Depot. Is there any kind of instant cleaner that I could douse them with?

Answer: A mild acid will remove tarnish from copper, especially if you back it up with a little elbow grease and a scrub pad. Applying a clear finish once the copper is bright goes a long way toward keeping the tarnish from re-forming so quickly.

A thick tarnish-remover, such as Everbrite HD Copper Cleaning Gel, might be most suitable for your project because the gel formula is designed to stay where you brush it on, rather than drip off. Wait about an hour in warm weather or even longer if it's cold, until the tarnish looks like it is melting. If the gel dries before you see this, re-wet it by brushing it with water. When the tarnish rubs off easily, wipe off the residue with paper towels.

In all likelihood, the surface will still look uneven, with patches of tenacious tarnish. Rub those away and make the surface evenly shiny with superfine or fine steel wool (labeled 0000 or 000) or with a synthetic scrub pad.

Neutralize the gel formula's acid by rinsing the pipe with a special neutralizing solution or baking soda in water. Follow with a plain-water rinse and dry the pipe with a cotton cloth.

Prepare the surface for a clear finish by wiping with a solvent such as denatured alcohol or xylene. Then apply a clear coating, such as Everbrite Protective Coating. Use a sponge brush, a clear-coat applicator pad, a natural brush or a pad made of lint-free cloth. For coating horizontal pipe rails, a cloth pad might work best. Wear protective gloves, such as ones made of nitrile.

To calculate how much surface you need to treat, dig out a geometry formula from high school. The surface of a cylinder, not counting the ends, is 2pr times height, where the value of “p” is 3.142, “r” is the 1-inch radius of your pipe, and “height” is the total length. Everbrite Kit 4oz with Gel, $43.95 from the company's website, everbritecoatings.com, contains enough gel cleaner, neutralizing solution and protective coating to treat 25 square feet, or about 48 feet of pipe like that used on your railings. Given that you have about 60 feet to treat, you could buy two of the 4-ounce kits or get the next size up, 16 ounces, for $89.95. Given that the price is virtually the same either way, go for the bigger kit, because it gives you more leeway in case you want to apply multiple coats of cleaner or finish.

TribLIVE commenting policy

You are solely responsible for your comments and by using TribLive.com you agree to our Terms of Service.

We moderate comments. Our goal is to provide substantive commentary for a general readership. By screening submissions, we provide a space where readers can share intelligent and informed commentary that enhances the quality of our news and information.

While most comments will be posted if they are on-topic and not abusive, moderating decisions are subjective. We will make them as carefully and consistently as we can. Because of the volume of reader comments, we cannot review individual moderation decisions with readers.

We value thoughtful comments representing a range of views that make their point quickly and politely. We make an effort to protect discussions from repeated comments either by the same reader or different readers

We follow the same standards for taste as the daily newspaper. A few things we won't tolerate: personal attacks, obscenity, vulgarity, profanity (including expletives and letters followed by dashes), commercial promotion, impersonations, incoherence, proselytizing and SHOUTING. Don't include URLs to Web sites.

We do not edit comments. They are either approved or deleted. We reserve the right to edit a comment that is quoted or excerpted in an article. In this case, we may fix spelling and punctuation.

We welcome strong opinions and criticism of our work, but we don't want comments to become bogged down with discussions of our policies and we will moderate accordingly.

We appreciate it when readers and people quoted in articles or blog posts point out errors of fact or emphasis and will investigate all assertions. But these suggestions should be sent via e-mail. To avoid distracting other readers, we won't publish comments that suggest a correction. Instead, corrections will be made in a blog post or in an article.