Take care of lawn tools now; spring will be a breeze
By Ed Pfeifer
Published: Wednesday, Nov. 7, 2012, 8:55 p.m.
The vast majority of us associate November with culinary delights and football.
But somewhere between the gravy boat and the line of scrimmage lies the homeowners' lingering responsibility to his lawnmower, weed trimmer and other gasoline-powered equipment — which need to be prepared for the long, cold winter ahead.
Most folks use these tools deep into the fall, others already have put the equipment to rest.
But in my experience, few of us take the time to properly winterize the equipment.
Winterizing in the days of regular gas, simple engines and overbuilt bodies was fairly easy — empty the tank and toss the machine in the shed.
Those days are long gone.
Modern engines are more sensitive and gasoline is now a chemical blend that barely resembles its forebear.
The steel components are not what they used to be either. So winterizing has become different, but is still not difficult.
In recent years, I have embraced the following method for my stuff.
It is a minimalist's approach, but it works. So I offer it here as a guideline, but always check your owner's manual for specifics.
First, treat the fuel in your storage container with fuel stabilizer.
Most stabilizers are inexpensive and may be used in both two- and four-stroke engines.
This accomplishes a couple of things. It allows you to retain and use that fuel in the spring, and it gives you a freshly treated batch to run through your machines.
Next, dump a little gas in the equipment, use it for the last time of the season or just let the machine idle until it absolutely runs itself dry.
The infusion of treated gas will act as a cleanser for the fuel system. By running the machine dry, the carburetor will be able to expel all of the fuel from its ports and jets, thereby purging any impurities.
With the fuel and fuel system handled, it is time to move on to the body of the tool.
For the mower, start by disconnecting the spark plug wire and thoroughly cleaning all of the accumulated grass from the underside of the deck.
Trimmers, leaf blowers and tillers should be comparably cleaned so that any grass, leaves or dirt is removed.
Spray the cleaned deck as well as other metal and moving parts with a nice coat of a WD-40 or similar product to repel water, fight rust and lubricate.
Look for areas that might corrode or get stiff from sitting all winter such as the wheel adjustments, throttle cables and blade adapters.
Spray them liberally.
At this point, let the machine cool, put it in storage and, as a final touch, launch a preemptive strike against rodents by dressing the mower in a dose of mouse repellent.
When it comes to machines that require oil changes and additional work, I prefer to save that for spring.
But those things are imperative, so don't forget. As for the handheld equipment, come spring, just add gas and away you go.
Winterizing can mean the difference between a quick start and a rope pulling, arm numbing, cuss inspiring, unsuccessful exercise next spring.
So before the scents of roasted turkey and the sounds of televised gridiron action fade from your memory, head for the tool shed and get it done.
Ed Pfeifer is the owner of Pfeifer Hardware Inc., 300 Marshall Way, Mars. If you have any questions, call the store at 724-625-9090.
Show commenting policy
TribLive commenting policy
You are solely responsible for your comments and by using TribLive.com you agree to our Terms of Service.
We moderate comments. Our goal is to provide substantive commentary for a general readership. By screening submissions, we provide a space where readers can share intelligent and informed commentary that enhances the quality of our news and information.
While most comments will be posted if they are on-topic and not abusive, moderating decisions are subjective. We will make them as carefully and consistently as we can. Because of the volume of reader comments, we cannot review individual moderation decisions with readers.
We value thoughtful comments representing a range of views that make their point quickly and politely. We make an effort to protect discussions from repeated comments either by the same reader or different readers.
We follow the same standards for taste as the daily newspaper. A few things we won't tolerate: personal attacks, obscenity, vulgarity, profanity (including expletives and letters followed by dashes), commercial promotion, impersonations, incoherence, proselytizing and SHOUTING. Don't include URLs to Web sites.
We do not edit comments. They are either approved or deleted. We reserve the right to edit a comment that is quoted or excerpted in an article. In this case, we may fix spelling and punctuation.
We welcome strong opinions and criticism of our work, but we don't want comments to become bogged down with discussions of our policies and we will moderate accordingly.
We appreciate it when readers and people quoted in articles or blog posts point out errors of fact or emphasis and will investigate all assertions. But these suggestions should be sent via e-mail. To avoid distracting other readers, we won't publish comments that suggest a correction. Instead, corrections will be made in a blog post or in an article.
- Pitt rallies in final seconds of overtime en route to OT victory over Clemson
- Penguins notebook: Fleury feeling sharp entering tough stretch
- Led by Kittanning’s Nolf, 3 locals win Class AA state wrestling titles
- Greensburg woman accused of assaulting nurse in Excela Health Westmoreland Hospital
- Robert Morris advances to NEC title game
- Pirates notebook: Liriano looks to complete consecutive quality seasons
- Donor name to be stripped from Penn Hills library
- Penguins notebook: Maatta leaves lasting impression with Selanne
- Spring training breakdown: Pirates 10, Rays 5
- Former Pitt coach Majors in stable condition after heart procedure
- Trade to Penguins caps frenetic period for winger Stempniak